Automotive glass products, Parts, Glazing, Tools & Equipment   

	Home » GLAZING » All Products   Economy Cold Knife This affordable cold knife has a stainless steel pull cable with a fused end flute and a large, easy-to-grasp aluminum pull handle that is virtually indestructible. 5" Long and comes with one Z4 Blade. Price: $21.00 English Putty Knife 1 1/2" english putty knife Price: $0.01 Ergo-grip 11 in 1 Ergo-Grip combination 11-in-1 tool with screw bit, stiff carbon steel blade Price: $0.01 1 of 3 Express Blade Sharpener SFE329 Retain the chisel edge on your Express Blades! To get the best performance, it is important to put a good edge on the blade every time you use your auto glass cut-out knife. Since you do not always have access to a bench grinder, this sharpener will do that quick touch up that brings the blade back to a razor-sharp edge. You can sharpen the blade in about 10 seconds by dragging the sharpener across the blade 3 or 4 times. All off-the-shelf sharpeners will put a V-type edge on the blade and this type of sharpening can prevent the tool from working properly. Our Express Blade Sharpener puts the chisel-type edge on the blade and keeps your auto glass cut-out knife operating at peak performance. It also features a built-in protector to keep you from cutting your hand on the blade. Price: $19.00 Express Sheath ES1406 The sheath is a unique idea that allows the Equalizer auto glass cut-out knives to use a flexible blade and still have the strength to cut the toughest urethane. Equalizer Express Blades come in longer and shorter sizes, but there is only one size sheath and it fits all Equalizer tools that utilize the Express� Blades. Made in the USA. Price: $37.00 Extra Long Utility Knife Blades - 10 Standard utility knife blades measure only 2-3/8" long. The maximum cutting area you can get is approximately 1". Equalizer extra-long utility knife blades measure a big 3-3/4" long and give you an exposed cutting area of, at least, 2-1/4". They are designed so there is more length between the two notches. For this reason, these blades will fit most standard utility knives as well as all long knives that use the standard utility knife blade. Package of ten. Price: $14.49 Extractor 6 3/4" Blade Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $40.00 Extractor Delta Blade 10" EXT-DELTA-XXXL Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $56.00 Extractor Delta Blade 7 3/4" EXT-DELTA-XL Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $45.00 Extractor Delta Blade 9" EXT-DELTA-XXL Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $53.00 Extractor Narrow Blade 10" BLDN-XXL Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $49.00 Extractor Narrow Blade 5 3/4" EXT-BLDN Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $33.00 Extractor Narrow Blade 8" BLDN-XL Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel. Price: $47.00 EZ Deglazer Blade EZ102-1 EZD Glazier Replacement Blade/ Pizza Cutter SAVE BY ORDERING 3+ Price: $31.00 EZ Deglazer EZ101 EZD Glazier Cut Out Tool, aka the Pizza Cutter, For 10+ quantities call for quote. Price: $56.00 F-102 Driving Wedge (Pounding Block) Price: $17.10 Fein 1" Blade - 2 Cutting part 1" long. Sharpening: one side regular, one side serrated. Package of two. Price: $67.00 Fein 1.6 Quick Change Fein Super Cut Quick Change Cut Out Knife Kit  Price: $725.00 Fein 1-1/2" Blade - 2 Cutting part 1-1/2" long. Sharpening: one side regular, one side serrated. Package of two. Price: $67.00 Fein 2-1/4" blade Pkg. of 2 Cutting part 2-1/4". Total length 4-3/4". Sharpening 1 side regular one side serrated. Z bend Price: $130.00 Fein 2-3/8" Blade 2 Cutting part 2-3/8" Total length 4-3/4" Sharpening: one side regular, one side serrated. Z bend. Package of two. Price: $155.00 Fein 2-3/8" Blades Cutting part 2-3/8". Total Length 3-1/8". Regular sharpening both sides. Package of 2. Price: $174.00 Fein 3/4" Blade - 2 Cutting part is 3/4" long. Sharpened one side regular, one side serrated. Package of two. Price: $67.00 Fein blade 128 Mushroom Blade Price: $6.65 « Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next »
	home | products | about us | search | links |checkout | contact us Copyright Policy  Privacy Policy Copyright © 2024 Western Glass Supply Inc, All rights reserved. Design and Hosting by SanbornWebDesigns