Home

About Us

What's New

Policies

View Cart

Search

Contact Us

  
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 

 

 

 







 

 

 

Login Status  Login Status

Client login not enabled


 

Automotive glass products, Parts, Glazing, Tools & Equipment   
 

Home » GLAZING » HAND TOOLS

 Checkout
1/2" Pinchweld Preparation Tool
1/2" Pinchweld Preparation Tool
Used to remove urethane and butyl from the pinchweld. Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass. 6-1/2" Long.
Price: $8.00
1/2" Pinchweld Preparation Tool
1/2" Pinchweld Preparation Tool
Use to remove urethane and butyl from a pinchweld.

Made with a hardened steel blade and long shank to keep your hands away from pieces of broken glass.

4" Long.

Price: $8.00
1/2" Wool Daubers - 100
1 of 2
1/2" Wool Daubers - 100
Many vehicles have very small pinchwelds and conventional daubers are too large. A large dauber may cause urethane to spread onto the headliner or worse, drip onto the seat.

This is the reason why we offer these small daubers, measuring only 1/2" in diameter. Made of a thick wool tuft that is held tightly in the center with a strong wire that extends back 4-1/4" and forms a circular grip for easy gripping.

1/2" diameter and approximately 6" length.

Price: $10.00



14" PipeKnife With Neoprene Cover BD79
14" PipeKnife With Neoprene Cover BD79
The PipeKnife is 14" long and has a 6-1/2" flattened blade shaft with rounded corners. The PipeKnife is made of cast aluminum but has a steel nut cast into the back side to receive the screw and prevent stripping of the threads. Take out the rear plug and you can put a pipe in the handle to extend its length.

The PipeKnife can use all standard utility knife blades including our ULB582 and DD1086 Extra-Long Utility Knife Blades.

Blades not included.

Price: $23.00
2 in 1 Window Tool
2-in-1 window tool
Price: $12.36
Balance Rod Tool
Fork Type Balance Rod Tool
Price: $14.25



Balance Rod Tool
Fork Type Balance Rod Tool
Price: $20.60
Balance Rod Tool
Single Hook Balance Rod Tool
Price: $14.25
Bent Putty Knife
1 1/4'' Bent carbon steel blade, putty knife
Price: $8.50



Blade Removal Tool BRT225
This handy tool makes removing blades easy. Simply match the teeth on the tool with notches on Stingray or Express 360 tool's blade holder and pull the Blade Removal Tool to release the blade.
Price: $2.00
BounceBACK 12" Pinchweld Protector MTF185
Replacement 12" pinchweld protector for the Equalizer BounceBACK Pinchweld Protection System.

WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings

Price: $3.00
BounceBACK 18" Pinchweld Protector  MET184
Replacement 18" pinchweld protector for the Equalizer BounceBACK Pinchweld Protection System.

WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings

Price: $4.00



BounceBACK 24" Pinchweld Protector MTF183
Replacement 24" pinchweld protector for the Equalizer BounceBACK Pinchweld Protection System.

WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings

Price: $5.00
BounceBACK 48" Pinchweld Protector  MLP182
Replacement 48" pinchweld protector for the Equalizer� BounceBACK Pinchweld Protection System.

WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings

Price: $10.00
BTB Diamond Sharpening Stone
BTB Diamond Sharpening Stone
The BTB Diamond Hone blade sharpening stone provides a keen and sharp edge on all of your BTB blades and other cutting blades. When sharpening BTB blades, sharpen the rounded side only. For any small burrs created on the flat side, give them a slight touch up only to remove the burr.
Price: $17.00



BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 1" Wide
1 of 2
BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 1" Wide
The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.
Price: $19.00
BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 1-9/16" Wide
1 of 2
BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 1-9/16" Wide
The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.
Price: $16.00
BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 3/4" Wide
1 of 2
BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 3/4" Wide
The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.
Price: $19.00



BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 9/16" Wide
1 of 2
BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade - 9/16" Wide
The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.
Price: $19.00
Bullet Blade 1-1/2" W x 12" L REL261
Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.
Price: $42.00
Bullet Blade 3"  W x 10"  REB262
Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.
Price: $42.00



Bullet Blade 3"  W x 14"  L REE264
Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

WARNING: This product contains a chemical known to the State of California to cause cancer. For more information go to P65Warnings

Price: $42.00
Bullet Blade 3" W x 12" L REL263
Bullet Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.
Price: $42.00
Caliper IGC
IG Caliper
Price: $33.60

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | »


 
 

home | products | about us | search | links |checkout | contact us

Copyright Policy  Privacy Policy

Copyright © 2021 Western Glass Supply Inc, All rights reserved.
Design and Hosting by SanbornWebDesigns